100% ACRYLIC GLOSS INTERIOR PAINT
Surfaces: Plaster, wallboard, wood, metals and plastic
Applications: Primarily for doors, trim, cabinets and windows, but may be used effectively on walls and ceilings when a gloss finish is desired. For surfaces other than walls such as cabinetry, windows, doors, baseboards or moldings we recommend the use of ECO waterborne enamel in brilliant or satin.
Eurolux Gloss is available in white, 10,000 FPE colors, 3,000 Pantone colors and an unlimited number of custom tinted colors. Eurolux is suitable for clients seeking a high gloss wall finish.
DESCRIPTION Eurolux Interior
Gloss is an odorless, high performance waterborne finish suitable for all properly prepared interior surfaces. EUROLUX may be applied over sound existing latex or oil finishes without priming, although better appearance and enhanced durability will result if the surface is first primed with the appropriate FPE Primer. Eurolux Gloss White is a non-yellowing coating and recommended for use in those areas of the home in which previous alkyd finishes have yellowed as the result of insufficient sunlight. Eurolux is extremely easy to work with as it dries quickly and is completely free of odor. The VOC of Eurolux Gloss is the lowest VOC of any high-quality, waterborne gloss finish in the world. This remarkable paint is as scrubbable as gloss oil enamel, which makes it ideal for the active lifestyle. A EUROLUX Interior Gloss application can be expected to yield ten to twelve years of beauty and protection. Please note that EUROLUX Gloss does not possess the same high reflectives as HOLLANDLAC or ECO Brilliant.
Eurolux flows easily and spreads quickly, but do not overwork with brush or roller. Do not apply at temperatures below 40˚F or above 80˚F, or when relative humidity exceeds 80%. Surfaces must be dry, clean and free from grease. New wood should be primed with ECO Primer/Undercoat (for wood varieties subject to bleeding) before receiving EUROLUX Gloss topcoats. EUROLUX Gloss is normally brushed or rolled in a two-coat application.
New woodwork and walls: Clean and sand. If required, fill holes and cracks. Apply one coat EUROLUX Interior Acrylic Undercoat to wall surfaces and finish with two coats of EUROLUX Gloss. Apply one coat FPE Oil Primer/Undercoat or ECO Primer/Undercoat to wooden surfaces and finish with two coats EUROLUX gloss. For optimal appearance, sand Primer and first coat of EUROLUX glass-smooth with 220 paper and remove all dust before applying final coat.
Previously painted woodwork and walls: Clean and sand. Remove all loose and flaking material. Spot prime exposed wood substrate with FPE Oil Primer/ Undercoat or ECO Primer/Undercoat or reprime entire surface. Spot prime exposed or spackled wall surfaces with EUROLUX Primer or reprime entire surface. Finish with two coats of EUROLUX Gloss. For optimal appearance, sand Primer and first coat of EUROLUX glass-smooth with 220 paper and remove all dust before applying final coat.
Metal and plastic surfaces: Prepare with the appropriate FPE Primer. Refer to primers in directory.
In addition to the Classic European Colors, this coating is available in 10,000 FPE colors, 3,000 Pantone colors and unlimited custom tints.
Features: Fast-drying, non-yellowing exceptional resistance to water, solvents and detergents. Offers high resistance against impact damage and burnishing. Excellent adhesion over existing sound finishes which have been lightly sanded. Levels beautifully to resemble an oil finish.
Application: 3/8” nap roller, Omega Orel brush or synthetic domestic brush.
Clean-Up: Clean tools immediately after use with hot water
Drying: Dust free in approximately 1 hour (68?/65% humidity); can be recoated after 3 to 4 hours.
Coverage: 2.5 liter Eurogallon™ = 320 sq.ft.
1 liter = 128 sq.ft.
Binder: Acrylic copolymers
Pigments: Titanium Dioxide, mineral and organic color pigments
Thinner/Clean up: Water/Hot Water
Specific gravity [g/cm3]: 1.25 (White)
(varies according to color)
Solids content (for white);
• by weight: 55%
• by volume: 43%
Viscosity: 110-115 KU
Specular gloss (60?): 70-90 GU (White)